Cost of Biycle Spares

Hello there! Figure you are buying lots of bicycle spares recently? Well, I have, and I thought about making a list of their prices. These may not be the cheapest ones and definitely not even close to the best quality, but they should give an idea about how much the most common things in the market cost. This list is mainly for the spares that can be used on local Indian steel bicycles. Do you have anything to add? I could use your help to make this list more extensive :)

Single Speed Freewheels:
Rs 45 for 18 teeth to Rs 65 for 24 teeth (Pinochio)

Rear Hub:
Rs 70

Tube, with Woods-Dunlop valve:
27×1-1/4″: Rs 50 (Bedrock Tyres)
26″: Rs 45 (Unknown)

Reflectors:
With plastic mount for seat post: Rs 20
For wheels: Rs 8 (small size)

Saddle:
Good ones from Hero/Herucles: around Rs. 200-230

Handle-Bar Stem:
Small size (most Indian bikes have this one): Rs 85
Large size (double the height): Rs 185

Stand:
Strong, full steel stand held on the axle with a nut and supported on chainstay: Rs 70

Cable Lock:
Thick, around 1m: Rs 100
Thin, pretty small: Rs 60

Nuts and Bolts:
Biggest nut+bolt necessary would cost around Rs 10

Seat post:
Long: Rs 30

Drop Handle-Bar Foam:
Rs 160

Full mud guards (metal):
Around Rs. 50-70 each

Brake shoes:
Common (comes with cycles with callipers): Rs 5 each
LA Sovereign (for V brakes or callipers): Rs 40 a pair

Cable housing and cable wire:
Set of front and back (low quality): Rs 25
Set of front and back (with plastic lining inside): Rs 40

Bottle cage:
Metallic, attachment to frame not sturdy: Rs 30
Bottle (big size) + cage: Rs 70

Axles:
Front wheel: Rs 10?
Back wheel, short: Rs 20
Back wheel, long: Rs 30

Rear racks:
Weak, just for show, attaches to seat post clamp: Rs 75
Better, useful, attaches to the bridge between seat stays: Rs 160
More sturdy: Rs 260

Front basket:
Good size (most commonly seen on ladies cycles): Rs 160?

Bottom Bracket Lock Ring: Rs 5
Cotter Pin: Rs 8
Master link for chain: Rs 7

Geared MTB to a single speed Road Bike

I have had a 21-geared MTB – the Hercules Ryders ACT 105 – for quite some time and I loved riding it. It was mostly for riding small distances, all on the road. No offroading at all. Then, I started noticing stuff on the web about road bikes.

I had my doubts about how a road bike would fare in Bangalore. The roads in many places are not well maintained and potholes are a commonplace. These bikes don’ t have suspension and their wheels are bigger which, i thought, can get damaged when riding on bad terrain. But then the beauty of the perfect diamond frame, the big wheels and thin steel tubing made the road bike irresistible. So, I just went ahead and bought a BSA Mach. There was no particular reason for buying this particular bike – I wanted to test a road bike and the Mach happened to be one.

I went for a few rides and realized why they call these kinds of bicycles as “road bikes” – they are perfect for roads!  I did have to make a more conscious effort to avoid all those potholes and bumps, but when the surface was good, the ride was really great. The handling was superb and riding no hands was a piece of cake. The bike was not tending to lean to one side or the other and was riding perfectly vertical. The thin tyres at high pressures and the different riding posture made the ride faster as well as less tiring.

There were some changes I needed to make to the Mach so that it was comfortable to ride. It’s weight was a bit high compared to the aluminium alloy ACT 105, but after stripping the Mach of some of the non-essential items (rack, bottle cage, bottle, pump, mud guards, chain guard, lock), it was lighter than the un-stripped 105. The Mach is a single speed bike and comes with a gearing of 48×16 – this was just too high for me, and so I replaced the freewheel with a bigger one. The last modification was replacing the thin saddle with a slightly wider one with some amount of cushioning, and now the ride was perfect.

The single speed road bike is what I now ride most of the time. I love the fact that it has only one gear and there’s no more need for shifting, nor any need to adjust the gear cables every once in a while. A great feature of this bike is that requires almost no maintenance. The single speed is not much of a disadvantage because my gearing is low and climbing up slopes isn’t a big problem. Of course, I have to get out of the saddle more often and my top speed is reduced, but the comfortable positioning on the bike allows me to push harder and for longer. On my road bike, I can cover distances at least at the same speed as I used to do on my MTB, even though the MTB has 21 gears and the road bike has only 1.

I have still not gotten used the drop handle bars. This is mainly because in traffic I ride with a more upright posture and grip the handle bars on the tops. The problem occurs while braking because the brakes are located on the curved portion of the handle bar and I have to lean down to brake. There are the auxilliary brake levers on the tops, but they are ridiculously weak for quick braking. This coupled with the fact that brakes themselves are not very powerful forces me to use the main brake levers. Another problem with holding the tops is that after a some time, it starts to get painful in the palms. Update: After positioning the brake levers higher up, I can now ride on the hoods, and the drop bar is now definitely much more comfortable to use. I still have to reach down to brake, but in general, gripping the hoods is extremely comfortable.

After riding both the Ryders ACT 105 and the BSA Mach, I am of the opinion that an MTB is no match for a road bike on a road in terms of comfort, feel and raw speed. I realized that most roads in Bangalore are actually good enough for road bikes, hence they are more suitable as commute bikes than MTBs. The fact is that the Indian road bikes (BSA Mach, Hero Hawk, BSA Photon etc) don’t have much to show off in terms of components. The MTBs are equipped with 18 or 21 gears from good manufacturers, they have suspension and the tyres look like they will last longer, hence they have greater appeal. The road bikes  don’t have the specs of the newer MTBs, but they are cheaper (at least the ones mentioned above) and more suited to the kind of use that a bicycle commuter would put the bicycle to.

Hercules Ryders ACT 105 Review

The Hercules Ryders Act 105 (https://www.ticyclesindia.com/productfeatures.asp?pid=118) is one of the newer MTBs from TI Cycles. This review is based on my experiences after having used this cycle for commuting on Bangalore’s roads for a few weeks. NOTE: This review is for the older Ryders ACT 105. TI Cycles seems to have introduced a newer version (with which I have no experience) with the same name, but some different features like quick release for the saddle, a different kind of stem, different mudguards and a greatly different colour scheme.

This bicycle has an Aluminium alloy frame making it lighter than many steel framed bicycles. It weighs around 17 Kg – lighter when compared to the normal Indian single speed bikes in the market (which weigh 20+ Kg), but heavier when compared to the Hero Thunder MTB (which weighs a mere 13 Kg!). The frame size is 18 inches according to the TI Cycles website.

The bike comes with 21 gears (the entry level Shimano Tourney) and Shimano indexed revo-shifters for shifting the gears in the rear while there are Shimano friction revo shifters for the front. Gear changing is not smooth, but you can live with it. The gears ratios on this cycle are more suitable for climbing rather than going very fast on straight roads or downward slopes. While cycling on Bangalore’s roads, I never have to use the smallest cog in the chainwheel. Overall, only 7-8 different gear ratios out of the 21 possible are useful for me.

The saddle on this cycle really impressed me. My previous cycle had a pretty hard saddle and it could get uncomfortable sometimes. The saddle on the ACT 105 has a different shape (wider at the back) and has a soft cushion on top which is depressed lengthwise (front to back) in the middle. There are also spring shock absorbers for the saddle. These features make for a really comfortable ride.

The seat post was too short – the seat height could not be increased much, and hence I needed to buy a new longer one.

The cycle comes with butyl tubes and nylon tyres from Wanda (size: 26″x1.95″) which have a good grip on the road. The air retaining ability of the tubes is also good. They need to be filled with air only every month or so. But when the tubes are inflated fully, the ride can get slightly rough because of the grips on the tyres and the aluminium alloy frame. The cycle has alloy rims. These are better than steel rims and provide a very good braking surface.

The brakes are V brakes both in the front and back. These are good when adjusted well and in my opinion, these are better than the calliper brakes that come with lower end cycles. On my cycle, the rear brake shoes can’t be lifted to the correct height resulting in considerably reduced braking power. This is probably a one off mistake, but I guess it would be wise to check for this problem.

There are front shock absorbers which are spring loaded. The travel for these can’t be adjusted. I have not found much difference due to the front shocks on normal roads with minor potholes and on untarred roads. The vibrations from the rough terrain are felt quite hard at the handlebars (and the rest of the cycle). There are no rear shock absorbers.

The handle bar is of the flat variety with bends towards its middle, so you can flip it or rotate it (up-down) about the clamp to increase/decrease it’s height or to change its distance from the saddle. It comes with bar ends. The grips are good.

Fenders come from the start, but they are of the flexible plastic kind. I would any day prefer the normal metallic kind of fenders that come with other bicycles. The worst part about these is that they allow a lot of muck from the road to be splattered all over the rider! These plastic ones may look good, but their attachment to the frame is not good and they can go out of adjustment with a little force. The rear fender is fitted to the seat post with a plastic attachment which could be broken and replacements are not available. Also, when applying the front brakes, the front fender comes in the way of the brake arms. This isn’t a problem for braking, because the plastic fenders bend easily and don’t provide much resistance to the brake arms, but then the fenders are not supposed come in the way in the first place. Another problem with these fenders is that they can get noisy on rough roads.

The cycle does not come with a carrier attached. There are other cycles in the market which have a carrier which is welded to the frame. Some of these look ugly and you have no option to remove the carrier. The 105 is good in this respect. A reasonable carrier that fits would cost around Rs 160.

A bottle holder is attached on to the frame from the beginning with screws and there’s also a plastic bottle provided. These are just show pieces and are pretty bad in quality. The bottle holder is likely to break easily and the bottle leaks from the top. The positioning of the holder on the frame is too low, so riding on a small puddle will cause the bottle to be splashed with muddy water all over.

The paint job is done really well.

Riding an MTB on tarred roads seems to require more effort, and due to the knobby tyres and the aluminium frame on this cycle, the ride can feel rough. This isn’t a problem and I feel the cycle to be reasonably comfortable for 20 km rides (on city roads).

Coming to the cost, this cycle should cost between Rs 6400 to Rs 7000 (the TI cycles website says Rs 7500 or so, but websites don’t put up the correct price), depending on how many shops you survey and your bargaining skills. Many shops did talk about rising prices and quoted rates of Rs 7200+. The TI cycles site suggests that some tools (Allen keys) are provided with the cycle, but I was not given any tools. Make sure you ask the seller to provide you with the required tools with the bicycle (I guess it should be free of cost). I was not provided with a manual either – maybe some shops give them. I got a 2 year warranty for the frame (welding problems and cracks/breaks) and handlebar, but not for the gears or other small components which are more likely to get damaged.

Create your own website, free on WordPress.com.Create your own website.
Start free